Flyroun 5" caged FPV frame TPU parts.

All the TPU-parts I designed and printed for my Flyroun 5" caged FPV drone from aliexpress
Link; https://www.aliexpress.com/item/1005008885872338.html
It looks like the same frame is sold under other names from other sellers, however I cannot verify that the parts will fit those.

Gopro mount is designed to be fastened with the four screws in the front, and a ziptie for extra support in the back.

Feet are designed to be printed with the top on the build plate, you will need a little bit of support for where the plate will be.

GPS-mount is designed for Matek M10Q-5883, use two spacers to keep the parts together.

RX mount is for a Radiomaster RP4TD, but will fit most RXs, I used transparent shrink tube around the mount and rx, and ziptied the mount to the frame with 4 zipties.
If your ELRS-antennas has the tips for the ends of the wire, you will have to pull those off to get it trough the printed parts, and you can use some glue to put them back on after.

USB-mount is for a “HGLRC Tuning Adapter” USB-C port

Vista antenna mount should fit most VTX system antennas, print two for o4.