Middlefinger LED Lamp

Hey there!

Here I have a small LED-Lamp for you!

You will need some diffuse 5mm LED's, thin wire, soldering components, resistors and an old USB-A cable. (Maybe a power-bank)

Just print the files with my recommended settings and press in the LED's. Press in the Lens and glue the back cover on after soldering and testing the LED's. 

Use diffusers for a better light distrubution and make sure to print the lens with white material. If you only have white LED's, you can use a colored material, should work fine. (has to be at least tranlucent. 

Print time is about 4,5 H.

Print Settings:

Body and Cover:

Nozzle: 0.6 (0.4)

Layers: 0.3 

Infill: 20-40 %

Supports: none

Material: non transparent/translucent

Lens: 

Nozzle: 0.6 (0.4)

Layers: 0.2 

Infill: doesn't matter

Supports: none

Material: White PLA/PETG (or any translucent color, make sure light can travel through!)

Diffusor:

Nozzle: 0.4

Layers: 0.2 

Infill: doesn't matter

Supports: none

Brim: 5mm

Material: White PLA/PETG (or any translucent color, make sure light can travel through!)