Qidi Q2 Controller Fan 40mm Gasket

This is a TPU gasket to flush mount the Qidi Q2 40mm controller cooling fan to the rear cover.  No more gap and better overall circulation as now can feel it exhaust out the slots to the right of the poop chute as intended! Should help cool the SSR for the chamber heater a bit better.  Helps reduce fan noise/vibration.

Also included is a small TPU washer for the fan screws (print 4 of them).  Use 20mm long 3mm screws for stock 4010 fan and 30mm long screws for a 4020.

Printed with 95A TPU / 2 walls / 3 Top and Bottom layers / 15% Grid infill / 0.2 layer height

Happy printing!