Samurai girl III. HueForge

AI image - source/author: Andrew Bailey
Then used HueForge v0.9.0 to create the model.

• Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
• Model size is 150 x 150 mm (or 200 x 200 mm second STL).
• Do not adjust the height (Z) in your slicer! The layers would not be correct. You can only modify the X and Y dimensions.

You may print at higher layer heights below the Base Thickness of 0.56mm. The Max allowed Thickness is 2.08mm and the Actual Thickness is 2.08mm.

It is possible to print without material system by manually changing the filament (setting filament change or pause) in the slicer, depending on your printer and sw support.

These were my settings and colors for my print that you see in the picture. Your results may be depending on the filament you use.

PLA Elegoo + Black  Transmission Distance: 0.3
PLA Sunlu META Grey  Transmission Distance: 3.6
PLA Elegoo + Gray  Transmission Distance: 3
PLA Elegoo Basic White  Transmission Distance: 7
This print uses 4 unique filaments

Start with Black
At layer #11 (0.96mm) swap to Grey
At layer #14 (1.2mm) swap to Gray
At layer #17 (1.44mm) swap to White for the rest.