September 27, 2025
Description
A desiccant box to hold silica gel beads (Dry&Dry) for the Chitu FilaPartner E1
The model is for the back-left/front-right corners. For the other two, mirror the print.
Printing:
Prusament PC Blend, Standard Profile, 0.4 Nozzle, 0.2 Layer, 100% infill.
My prints warped a little on the bottom, but it did not affect the fitment.
Note: Cover the hole with your finger and shake the desiccant box to get out any malformed beads.
Note2: When designing this, I was able to turn the entire Chitu box upside down and shake it without any beads falling out. YMMV.
Note3: Also made a 1.8mm version
License:
Creative Commons — Attribution — Noncommercial
7
Jason Englert
