Toothbrush + Induction Charger Wall Mount (Oral-B & Philips Sonicare)

At long last, the electric toothbrush has a functional, aesthetic and permanent place in the bathroom- and it's not the sink countertop! The induction charging base, which used to only appear during weekly recharging, nests perfectly in this housing and becomes a full-time mount for the toothbrush. The built-in cable management feature below allows for the power cable to stay compact and tidy, when not extended to reach an outlet. Mount this on any surface near an outlet and reclaim your bathroom counter space once and for all!

The attached image shows the mount fixed to the side of an IKEA GODMORGON mirror (MDF with a reflective foil surface) by a single 4 x 16 mm countersunk wood-screw. Mounting with double-sided tape is possible too, due to the large and flat back surface, however I personally prefer the peace of mind of a good mechanical fastener. :D

Update: A big thank you to the early and positive feedback I've been getting as well as from those of you who reached out to request an adaptation for the Philips Sonicare base. If you like the design but have a different brand or model, please feel free to write to me and let me know- I'd be happy to build it into this product family! Please note: the Sonicare version was built from dimensions that I received digitally. I printed this version to confirm that it prints well without supports, but I cannot confirm the exact fit of the charging base. If anybody would like to print and confirm it, upload a make. I'd love to hear about your experiences with the model either way! Thanks again, and enjoy your new uncluttered countertops. :) 

Update 2: Added a modified version for the wider-frame Oral-B “Triumph” model. This model used the same induction charger base, but has a significantly wider handle profile. If you have a wider Oral-B model, choose the version with Triumph in the title. 

Update 3: Added a new version for the 47 mm diameter round Sonicare base. This file is titled “Sonicare Round”.

Printing:

Both designs print perfectly with no supports, using a 0.4 mm nozzle and standard PrusaSlicer “0.20mm QUALITY” settings. The part was designed with PLA in mind, but other rigid materials should print without complications.

Nozzle: 0.4 mm

Layer Height: 0.2 mm

Supports: None

Infill: 15%