Enclosure for ProtoBoard 1593K and NodeMCU

This is a project box / enclosure designed to fit the BusBoard Prototype Systems PR1593K circuit board. That particular board is available with or without a matching ABS case -- this is essentially a clone of that ABS case, only with an opening on the side for the USB port on a NodeMCU V3 board, if its positioned one perf row in on the board.

The end panels can either be drilled out or customized for whatever openings you need. But I had found the ABS box that was available with the board couldn't be cut cleanly for the USB port. Plus, I could print it in other colors.

I printed it at .15 resolution with 20% infill and three shells, but the walls are thin enough that the infill is barely used.

The board mounts to the box with the screws that come with it (4-40), The top and bottom screw together with two 4-40 bolts, 3/4" long.

Category: Electronics