glowing Emergency Exit Signs (3 types) (glow in the dark)

Summary

Self-illuminating emergency exit signs – printed quickly and easily with just one filament change!

Print

• Filament: “Glow in the Dark” and a nice, dark green filament (PLA or PETG - don't mix them!)
• Layer height: 0.2mm
• Infill: 100%
• Perimeters/Walls: 2
• Supports: Not required

Make sure to print the first two layers in green filament. You can use a height modificator in your slicer or a manual filament change.

Please note!

When using glow-in-the-dark material, be sure to use a hardened nozzle. Normal brass nozzles wear out quickly because the filament is very abrasive.

Installation

Use double-sided adhesive tape to stick the part onto the desired wall.

Do you like my work? I would be very happy if you would support my work on Ko-fi.