TOWEL RAIL HANGING HOOK

If you have a towel rail with  mounts less than 20 mm (3/4'") square, these simple hooks can add a little functionality to them.

The hook prints in three pieces which slot together with a pin securing the two main parts in place.  I'd strongly recommend a small dollop of superglue just to keep them there, but ours has been in use for a couple of years without any glue.

I've printed ours in PLA, if you print oriented as downloaded no support should be necessary, but depending on your printer,  you may have to trim the bridging on the hook part a little to get the pin to fit.