Porsche 992 911 Cup/718 Painting Handles

These painting handles are to attach to the main parts of Zebbeba's excellent Porsche Cup 911 992/718 GT4 wheel project which you can download here: https://www.printables.com/model/337685-turn-992-cup-diy-sim-racing-wheel

Hardware

These painting handles attach to the different pieces with the following hardware:

Button Guard Painting Holder Left/Right

• 6x M3x6mm Countersunk Bolt
• 6x M3 5mm x 5mm OD Brass Insert

Main Body Printing Holder

• 4x M3 25mm Cap Head Bolt

Front Plate Painting Holder

• 4x M3 x 12mm Cap Head Bolt
• 4x M3 Nyloc Nut

Front Handle Painting Holder

• 4x M4 8mm x 6mm OD Brass Inserts
• 4x M4 14mm Cap Head Bolt

Rear Handle Painting HolderRear Handle Painting Holder

• 2x M4 14mm Cap Head Bolt

Print Settings

Print with 4 walls at 15% infil at 0.24 layer height for fast printing.

Disclaimer

When you start this 3D-printed project and use this guide, you're agreeing to the following:

This guide is here to help and inform you. While I’ve worked hard to ensure it's accurate, I can't guarantee it's perfect or completely free of errors. The success and safety of your project ultimately depend on your own skills, good judgement, and adherence to proper safety procedures. If you're ever in doubt, I strongly recommend seeking advice via the DIY Sim Racing Workshop Discord.

You're building this project at your own risk. I cannot be held responsible for any damage to property, injuries to yourself or others, or any other losses that might occur as a result of using the instructions in this guide, any errors therein, or from the construction and use of your 3D-printed creation.

It is your responsibility to:

Exercise caution and wear appropriate safety gear

Understand the potential risks and limitations associated with 3D printing, electronics, and other tools or materials you use

Follow all relevant safety guidelines and best practices

Double-check any information or instructions before you proceed.