Dwarf Warrior – Funko-Inspired Chibi STL | FDM + Resin Optimized

Meet the Dwarf Warrior—a pint-sized powerhouse with big-head charm, glossy button eyes, and a beard that means business. Braced in plate and mail and hefting an oversized forge-hammer, he brings instant shelf presence for vinyl/chibi collectors and becomes an unforgettable NPC or objective marker on game night. 

Strong shapes, clear panel lines, and a rock-textured base make him read from across the room and photograph beautifully in your gallery.

Why 3D-printing makers will love it

• Chunky, print-safe detail (≥ 1.6 mm). Armor plates, beard rings, and hammer geometry are designed to survive sanding, priming, and frequent handling.
• FDM + Resin tuned. No wispy bits; overhangs are shallow; fingers are grouped; stress points are reinforced.
• Painter-friendly materials. Skin, beard, leather, mail, and steel each have distinct surfaces so washes and edge highlights pop fast.
• Display & tabletop ready. Vinyl/chibi proportions (oversized head, big eyes) deliver maximum “awww” with zero ambiguity on the board.

What’s included

• STL set: single-mesh (resin) + pre-split FDM (body, head/beard, hammer hand/weapon, base)
• Scale presets: 32 mm to-eyes (tabletop) and 90 mm (display)
• Print guide: 1-page PDF with slicer notes and support map
• Optional: pre-supported resin file

Print profiles

FDM (0.4 mm nozzle)
0.16–0.20 mm layers • 3–5 walls • 18–25% gyroid
Body upright; hammer flat or diagonal; base flat.
Minimal supports under beard tip, inside elbow, and hammer underside.
Peg/Socket clearances: 0.2–0.3 mm (ball-joint head optional: 10.0 mm ball / 10.3 mm socket).

Resin (collector finish)
0.03–0.05 mm layers • tilt 20–30° • medium raft
Medium tips (0.3–0.4 mm): beard underside, hammer head bottom, pauldron edges.
Light tips (0.2–0.3 mm): mail islands, belt tabs, boot arches.
Short, even post-cure to keep the hammer a bit forgiving.

Quick painting recipe (vinyl/chibi style)

1. Prime: black → zenithal gray → ivory.
2. Metal: dark steel + black/brown wash; bright silver edges on plates and hammer.
3. Leathers: warm brown + sepia wash; edge with khaki.
4. Beard: auburn or stone gray; glaze shadows at roots; pick beard rings with bright metal.
5. Finishes: matte on fabrics/leather, satin on armor, gloss on eyes for that collectible pop.

Keywords: dwarf funko inspired stl, chibi dwarf miniature, vinyl style 3d print, dwarven warrior hammer, resin printable figure, fdm optimized stl, 32mm tabletop mini, 90mm display model, beard rings dwarf, fantasy collectible

Disclaimer: Fan-made original design inspired by Funko-style collectibles and classic fantasy dwarves. Not affiliated with, endorsed by, or associated with Funko or any specific franchise/IP.