Hooded Adventurer – Funko-Inspired Chibi STL | FDM + Resin Optimized

Meet the Hooded Adventurer—a quiet legend with big-head charm, glossy button eyes, and that “I know the old road” energy. Cloak drawn close, satchel at the hip, and staff ready, this vinyl/chibi-style hero adds instant story to any shelf and becomes a perfect NPC or objective marker on game night. The stone-textured base and bold forms read clearly from across the table and photograph beautifully in your gallery.

The Hooded Adventurer is the kind of figure that looks like he’s already halfway through a quest—mud on the boots, secrets under the cloak, and that quiet “I’ve seen worse” stare that makes your dice roll themselves. The vinyl/chibi proportions give him instant charisma: oversized head with glossy eyes, deep hood casting a dramatic shadow, a travel-worn staff balanced in a mittened grip, and a satchel that suggests maps, rations, and at least one questionable relic. Set on a stone-textured base, he reads clearly from across a room and photographs beautifully—perfect for front-row display, or as the mysterious NPC who appears just when your party is about to take the wrong road. He’s a desk totem, a storytelling prompt, and a conversation starter all at once.

Under the charm, he’s built like a pro maker’s dream. The forms are deliberately bold so prints are clean and durable: cloak hems and staff are reinforced, fingers are consolidated for strength, and overhangs are kept shallow for support-light success on common FDM setups. He scales confidently from 32 mm (tabletop) to 90 mm (display), with keyed joins that dry-fit nicely (aim ~0.2–0.3 mm clearance) and flat contact surfaces that stick to the bed without drama. Resin printers get razor-sharp edges on belts and pouches with minimal island chasing; FDM users get smooth layer transitions that sand and prime fast. Hit him with a zenithal prime, a sepia wash on the leathers, a cool glaze in the cloak folds, and a touch of gloss on the eyes—and your Hooded Adventurer will look ready to step off the base and lead the way.

Why 3D-printing makers will love it

• Chunky, print-safe detail (≥ 1.6 mm). Cloak hems, pouches, and staff are reinforced to survive sanding, priming, and travel.
• FDM + Resin tuned. Shallow overhangs, grouped/mittened fingers, flat boot soles, and support-friendly angles keep setup simple.
• Painter-friendly surfaces. Cloak, leather straps, fur/cloth accents, and stone base each have distinct textures, so washes and edge highlights pop fast.
• Display & tabletop ready. Vinyl/chibi proportions deliver maximum charm with zero ambiguity on the board.

Print profiles

FDM (0.4 mm nozzle)
0.16–0.20 mm layers • 3–4 walls • 15–22% gyroid
Body upright; staff flat or diagonal; base flat.
Minimal supports under chin, inner cloak hem, and staff underside.
Peg/Socket clearances: 0.2–0.3 mm (optional 10.0 mm head ball / 10.3 mm socket).

Resin (collector finish)
0.03–0.05 mm layers • tilt 20–30° • medium raft
Medium tips (0.3–0.4 mm): hood lip, staff underside, cloak corners.
Light tips (0.2–0.3 mm): pouch edges, boot arches, base overhangs.
Short, even post-cure to keep the staff slightly forgiving.

Quick painting recipe (vinyl/chibi style)

1. Zenithal prime: black → gray → ivory.
2. Cloak: deep green/charcoal; glaze cool shadows in folds; soft edge highlight.
3. Leathers: warm brown + sepia wash; pick straps with khaki.
4. Staff/metal bits: dark steel/wood tones with subtle wear; satin finish.
5. Finishes: matte on fabrics, satin on metals/boots, gloss on eyes for collectible pop.

Disclaimer: Fan-made original design inspired by Funko-style collectibles and classic fantasy adventurers. Not affiliated with, endorsed by, or associated with Funko or any specific franchise/IP.