RepRack remixed for Ikea Racka

I always consider it disappointing when even big names do not follow basic rules for 3D printing design, so, here you go, I fixed it for you. When I was doing it, I also adapted the holes for very affordable and always accessible RÄCKA curtain rod, black, 28-47" - IKEA. The rod is sold in two lengths and it's retractable, which allows you to adapt it to most situations. The inner tube has a smaller diameter obviously, that's what the two adapter rings are for. Simply press them into the hanger which holds the thinner part of the rod. For the rest, same things and accessory is valid like for the original design.

In my case, I used french cleat to hang it, I'd also recommend to follow basic rule to place one hanger per 1m of the length of the rod. Depending on tolerances of your printer and used material you may or maybe not need to secure the rod with a screw (e.g. drywall should work pretty well here).

For printing, 5/25% ratio seems enough, as set in attached 3mf and ASA is the most recommended material of choice here.