March 13, 2026
Description
I recently bought a Luxe Bidet Neo 185. It's hard to install in a European toilet but much cheaper and more environmentally friendly than installing a whole new toilet just to have a bidet. After installing the bidet, the feet at the back were about 7 mm in the air. So I designed my own. I also replaced the default ones to make them look uniform. They fit tightly but can be removed with a sharp object.
If you are interested in which parts I used for the bidet Installation:
Toilet Brand: Geberit
Print settings
Printed in TPU 95A (flexible filament) with 100% infill for durability
Printed with the 3 knobs touching the build plate
Add a thin support ring around the perimeter for stability
No additional supports required
Notes
Designed for a 7 mm lift – can be scaled if needed
TPU recommended for flexibility, but PLA or PETG may also work
Feet are press-fit under the bidet, no adhesive needed
License:
Creative Commons — Attribution
Razzer09
