Prusa Mini X Axis Motor Cable Chain

My own take/mix on a cable chain for the X-axis motor wire of the Prusa Mini +. This design only requires some zip ties to attach the mount to the X-axis motor as well as three M3 nuts and screws.

Notes:

1) Each link has a small build-in support that needs to be cut off under each of the posts: 

2) Though not included in the STLs, I definitely recommend some form of bed adhesion improvement on the link flanges. Example: 

3) The tolerances between the posts and the holes in the links are zero. I did this so that pressing the parts together and then working them back and forth creates a no-jiggle fit.