Duratrax Battery Strap & ESC Mount Evader EXT2 (DTXC6305 Replacement)

This is a replacement for the battery strap and ESC mount of the Evader EXT2. The ESC mount will work with all Evader chassis, including the ST, ST Pro, EXT, etc but the strap will only work on an EXT2 or any other Evader that is already equipped with this ESC mount. This strap / mount combo will allow you to use LiPo batteries with your Evader or just replace the old strap that has been lost or broken.

I'd recommend printing the strap sideways with supports (rotated 90 degrees). I have not been able to get a successful print when oriented as presented in the STL with or without supports. The ESC mount prints best upside-down. Supports may be necessary if your printer can't handle overhangs but it printed fine for me without supports.

The strap is a replacement for DTXC6305 or DTXC6290 if printed with the ESC mount as well, however since DTXC6305 is still sold by Hobbico (manufacturer of the Evader, via TowerHobbies), I'd recommend using that part instead.

I believe the stock screws are 2xM3x10 to attach the ESC mount to the chassis. Foam between the battery and the strap is not required but definitely recommended.

Category: R/C Vehicles