September 12, 2025
Description
The purpose is to provide better lighting for monitoring prints in low-light environments, helping identify errors or adjust printing smoothly.
A 3x8mm screw is needed to install. there is a screw in the back that is used to mount the lights. make sure you zip tie the wire out of the way and long enough for the printer to travel all the way up without stretching the wires.
These are the lights I used.
https://www.amazon.com/ZSLAIFU-Dimmable-Flexible-Backlighting-Lighting/dp/B0D9M7FYS3/ref=sr_1_29?crid=1N65INZGH96XE&dib=eyJ2IjoiMSJ9.TpDLIu56uGzgxBiSYKL7NNRteVAitW2UTJ61Hb8Q66buHmiGxHH0p2QSt0iwhXoGt-vPAgnolD_h57z517nuMwyG9ePdMGDo8_iuAGlIPYIxFM6-db1h9leEnB37mF8YORk3mii1-WJA8jphFrmJEnX4ymzrz-2gzUHvreVNbJhip1_r9Kh10CqPoXy_iTGwuHtuiX0OZ7nyJkWohIHIonBDZ62L7vFR565hTAjRWRnOxHiOYDU_waCe1y2mqgUhAFHiB4JX3TptLSElC5KbAogOfb5Q4swUVmOfwRJhXdY.TtU0IsePUluyeWRnYuTs6eO8wYfZEMR0P242b6cDFkI&dib_tag=se&keywords=cob%2Bled%2Bstrip&qid=1754435658&sprefix=cob%2Bled%2Bstrip%2B%2Caps%2C156&sr=8-29&th=1
License:
Creative Commons — Attribution — Noncommercial — NoDerivatives
7
dukinarow
