Bookmark Doctor Strange

!!! READ THIS BEFORE YOU DOWNLOAD THE BOOKMARK!!!
!!! INSTRUCTIONS BELOW!!!

A unique bookmark for the Doctor Strange and Marvel lovers. Gift your loved ones who love to read and make them happy. Or print the bookmark for yourself.

Bookmark size: 60 x 190 (x 0.4) mm

INSTRUCTIONS
After downloading, you will find two .stl files in the folder. The bookmark was printed on an Eder 3 printer with a glass bed, so the 3D design of the bookmark was adapted to this. The printer does not support multi-colour/multi-material printing.

However, with a combination of human ingenuity and z hop functionality, this can be done as well. If you don't have experience with this feature, I recommend watching some videos on how to print multiple colors using z hop. For example:

//https://www.youtube.com/watch?v=TMV9tOZQ8fY&t=242s (ModBot thank you so much for the instructions on how to z hop.)

In simple terms, the idea is to print each color separately, while not moving the print bed that the color is already printed on. At the same time, you need to align the two parts well in the slicer so that everything prints exactly where it should. Remember to set the z hop to a height higher than the print height (at least 0.8mm). And of course be careful when manually changing the filament.

When everything is done right, the result is very satisfying. Good luck, may the bookmark make you happy!