Anker Zolo Qi2 Phone Stand

A very simple Stand for an Anker Zolo Qi2 wireless charging pad with a simple frichtion/press fit.
Just push in the pad from behind it then ever-so slighty sticks out so the phone does not rub against the stand.
 
I'm using this with a Pixel 10 Pro but it should actually also fit a Pixel 10 Pro or any other phone that is roughly less than 9,3cm in height from the center of the charger/ring.

Recommendation for printing

• A well calibrated printer for a proper press-fit
• 0.2mm Layers
• Face down, foot in the air