A 3D-printed adapter set for connecting a Starmixx Dustfixx pre-separator to a BOSCH GAS 35 L vacuum cleaner. In my example, I have also integrated a drawer for storing frequently used suction adapters, etc. However, the adapters can just as easily be mounted on a wooden board.
The adapter set consists of remixes of the following parts as well as custom-made parts.
- I remixed this adapter set: thanks @bennowolf
https://makerworld.com/en/models/1052579-l-boxx-workbench-plate-holder- Changes to the original design: The operating concept has been revised so that no cutout is required in the board; instead, the locking mechanism can be operated from the front. I have also adjusted the tolerances and fit.
- Parts needed for assembly:
- 6x M3x6
- 6x Ruthex M3 threaded insert
- 2x 6x30 spring (I used 0.5x6x30)
- I created the adapter set to mount the Dustfixx to the wooden board
- Parts needed:
- 4x 5x20mm spring (I used 0.5x5x20)
- Woodscrews to secure the adapters to the wooden board
- I remixed this connection hose adapter: thanks @tapani.siivo
https://makerworld.com/en/models/167516-bosch-gas35-hose-connector- Changes made to the original design: removed the “nose” and changed the fit, so that it can be connected to the Dustfixx intake.
drei-d-w
