PC4-M6 Bowden Tube Adapter For Creality K1 Series

Allows you to raise the bowden tube in combination with a riser to get a better feeding angle with less resistance, reducing the chance of underextrusion, reducing the sag in the drag chain and extending the life of the PTFE tube. Also helps prevent filament tangles by preventing the tube from being pushed out.

Replaces the factory filament sensor (using the DXC extruder with built in sensor is recommended if you want a filament sensor). 

The tapered design (V5 and V7) and the smaller center channel (V6 and V8) ensure smooth and accurate feeding.

Extended PTFE tube clips are recommended for fine tuning your feeding angle into the extruder

No supports needed. Print using a high temp filament like ASA or ABS. More walls = more strength

Things you might need:

PC4-M6 PTFE fittings (x2)
M3x10 screws (x2)
Fresh PTFE tube
11mm socket or wrench will help you to screw in the PC4-M6 connectors