September 18, 2025
Description
A ramp to allow for robot vacuums to be able to get over the legs of a drying rack.
The cutout is 16mm diameter, which snaps perfectly in place on my rack which is ~16.2mm.
Can be printed with 1 perimeter for less filament usage, which impacts quality but is still 100% functional (See pictures for 1 vs 2 perimeter difference).
1 perimeter and 5% infill used 35g (12m) of filament, while 2 perimeters and 5% infill used 48g (16.31m).
If it doesn't fit on your bed (Barely fit on my 250x250 bed), cut it in half in your slicer, shouldn't make a difference.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
Bjork3D
