MKE2-EW Lav mic concealer

Dimensions based on the Sennheiser MKE2-EW. No idea if it works with others. Conceales a lav mic and minimizes noise from clothes.

Print Settings:

• Rafts: No (Didn't need a raft on a PEI plate, YMMV)
• Supports: No 
• Resolution: 0.20 
• Infill: Fill with walls or 100%
• Filament material: TPU 
• Notes: Picture and only test with PLA, and I'd presume TPU to be the best for this. PLA did scratch against clothes a little bit but still better than nothing. TPU is probably great for this but don't have any yet. Comment your experience please.

Post-Printing:

I used a 0.8mm thick paperclip, bent it into the correct shape (& cut the "legs" at 5-6mm) and just press-fit it into place. Don't push it as far in as in the picture, maybe 1mm higher up. You can heat up the paperclip with a lighter to melt the plastic but I found this to be difficult to succeed. The holes are designed 1.1mm and a 0.8mm paperclip had a good press-fit. No idea if this will work with TPU though. Maybe just make the holes smaller and let the TPU bend out?