15mm camera rod swivel joint

I couldn't find a similar model so I made it myself. With this you can attach a rod to another rod in an angle, in 12 different angles, kind of like an analogue clock. It hould them pretty secure but I wouldn't put a LOT of weight on it. The reason I wanted this was to rig a little LED panel on top of a camera cart, and a rew rods + this would act as a stable arm for the light. And since I had the rods and a superclamp already, it was cheaper than buying some kind of arm for it.

Compatible with my 15mm / 19mm camera rod holders with dovetail i.e. same distance for the rods.

Hardware:

• 1x M6 x 50 hex bolt
• 1x M6 nut

M6 x 45 could work and be more flush if you find them. M6x40 is too short

You can add a little glue to the wingnut to have a more secure connection, but not necessary.

Printing:

• Print in the orientation in which provided
• Layers 0.2
• Walls 5
• Infill 25% cubic