September 18, 2025
Description
Wasn't able to do any reload drills with the Mantis Sensor on the magazine and with out the TLR-1 HL light, the firearm fitted too loosely in the holster.
Mount the sensor “forwards” and push it all the way back on the rail and the fake TLR-1 HL will fit around it.
Print in PETG or something durable.
Orient the print with the light facing down on the build plate.
I've had good luck with 15% infill and 3 parameters.
Supports needed for all the overhangs.
Extra Material Required
1 - M4-0.7x25mm Socket Cap Bolt
1 - M4 Nut
License:
Creative Commons — Attribution — Noncommercial — Share Alike
11
Dusty
