Tiny Mini Micro vertical PC mount. M93p, M715q, etc.

Mount for a Tiny Mini Micro computer. Has been tested on…

• Lenovo M93p,
• Lenovo M715q.

… I may (but cannot guarentee, I'll probably forget) add some more machines as I purchase them (I want one with a i5-7500T). This shouldn't need to be said, but this is for the computer only, i.e. not including the optional external optical drive.

Uses a small 3.5mm countersunk screw (2.5mm drill bit) for each mount (probably also works with 4mm, I made the holes slightly oversized). Suggest using 2 per computer. Wood thinkness is dependant upon the length of the screw (or vise versa)! Mine is a piece of 20mm scrap MDF from my local hacspace.

Suggested settings…

• 0.2mm layer height,
• Prints on it's side (as file is orientated) for better strength,
• No supports,
• No raft,
• 3 walls,
• 3 tops,
• 3 bottoms,
• 20% cubic infill,
• I printed in eSun grey PLA+ and seems fine so far (the i5 & Ryzen varients run a bit warmer than the i3),
• Printed mine on a Creality Ender 3, but should work on basically anything (may not be square if printed on a Delta, lol).