Resmed N20 mask clip

The clips on the N20 mask seem to crack and break after a while... yet the rest of the headgear is still in good shape.

I harvested the neodymium magnets from the broken clips and epoxied them in. Make sure your glue does not get into the bottom of dovetail area or it will not hook securely. Scuff the magnet before gluing for best results.

The circular depressions for the magnets are larger than the magnets to leave room for larger magnets if you don't have/want to destroy the old clips. The stock magnets are approximately 10x2mm. The hole in this clip is 15mm.

MAKE SURE that you orient the magnets the correct way or they will not work. The other part of the mask that these clip to has another magnet in it.

Category: Replacement Parts