MinikoMew Fish Charm / Nametag

Unofficial fan model of MinikoMew's fish collar charm/nametag

https://www.twitch.tv/minikomew   https://twitter.com/minikomew

Print Settings

• Printed in a Cyan PETG and White PETG, solid.
• (Optional) Printed facedown on a holographic plate. Printing facedown will also always be smoother regardless of plate (unless textured) If effects plate, bump normal PEI Hotplate temp ups by 10c
• 0.4mm nozzle, 0.2 layer height, initial layer height 0.12.
• First layer line width 0.25, other layers 0.42. This is important to fill in details
• Wall gen arachne, precise walls, etc, to fill in more gaps
• (Optional) I had success on an effects plate using 0.2 elephants foot compensation

Import both models into orcaslicer / bambuslicer / elegoo slicer as an assembly, set filament types to each object, and make sure they are aligned. Then if you want to print it face down, rotate it face down onto the plate.

If you don't have an AMS/MMS, it is only 4 filament swaps between cyan and white, depending on layer height.
 

Filaments used:

- DURAMIC PETG CyanBlue
- eSUN PETG White