Pilot Kneeboard for Pivot Cases

Disclaimer, The 3D printing model provided herein is intended solely for educational purposes. By downloading or using this model, you acknowledge and agree to the following terms:

No Warranty: This model is provided "as is" without any warranties, express or implied, including but not limited to fitness for a particular purpose or non-infringement.

Use at Your Own Risk: The use of this model in any application, including aeronautics, is at your own risk. The creator is not liable for any damages, injuries, or losses resulting from the use or misuse of this model.

Not for Commercial Use: This model is not intended for commercial use or any application that could pose a risk to safety or property.

Compliance with Regulations: Users are responsible for ensuring compliance with all applicable laws, regulations, and safety standards when using this model.

Indemnification: Anyone who prints or provides this model for printing agrees to indemnify and hold harmless the creator from any and all claims, damages, liabilities, or legal actions arising in connection with the use of this model.

By using this model, you agree to these terms and acknowledge that you have read and understood this disclaimer.

A friend of mine is a pilot and a new plane he now fly's, a piper, is too small for the pivot case windshield mount with his iPad pro so he asked me to see if there was a kneeboard for the pivot case (https://pivotcase.com/ cases for most anything) what i found did not seem to fit all of the requirements he had so i stared playing with existing models in tinkercad until i got to what i have here. as you can see from the pictures it fits well and maintains the pivot cases ability to clip in and out.

for hardware you'll need

• 6 m3x6mm screws for the strap cover
• 4 m3x20 screws
• 4 m3 hex nuts for the pivot portion.
• velcro strap no wider than 1.5"

Sources 

https://www.printables.com/model/14319-aircraft-knee-board-tablet-holder - leg arches https://www.printables.com/model/867445-pivot-case-ipad-mini-yoke-mount-for-pc12 - pivot pedestal

This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/4YbnuACw63e

Category: aeronautics, pilot, pivot case, kneeboard