Tripod leg claw/hook

Do you want anchor your tripod over the table so you can make a video without it being seen ? Ever wanted to hang your camera over something like railing, doors to make a time lapse? I wanted to make some video of gluing some miniatures but tripod was always in the frame so I came with this. 

Two part claw/hook that can secure one leg of your tripod, it's not in the way when you wanna use tripod as intended, it's easily printable, relatively small with minimum hardware.

Material

Zip ties or velcro cable strips, I like velcro more since they are reusable and most tripods have stoppers on the end of the legs.

Two M3x16mm bolts with round head. They are threaded straight to the plastic since there is no need for actual threaded insert for this

Printing 

You can orient parts so they don't need supports, but I recommend print them as they are with supports. You will end up with stronger part for this application.

PETG 0.2 layer height, 5+ walls, 5+ top and bottom layers, 30+% infill, supports tree on the plate only or normal everywhere

-----------------------

Do you like what we do ? Give us download and like. We burn a lot of plastic in prototypes so you don't have too. Thx :)