CAPA | Corner Soap Dish

CAPA | Corner Soap Dish

Meet CAPA, a very fast printing soap dish designed to fit neatly in the corner of your bathtub or sink.

The angled grooves naturally drain excess water, keeping your soap dry.

DIMENSIONS: W 150mm x D 110mm The length of each side of the 90deg corner is 110mm, and it was designed to fit on a bathtub rim of 4 to 5cm minimum.

3D PRINT SETTINGS: The soap dish prints vertically. The STL file is already oriented properly. No supports needed. No infill. No adhesion brim needed, but if you have adhesion issues you might need to add one.

I printed mine with a 0.4mm nozzle, 2 perimeter walls. But you can print with 0.6 and 0.8mm nozzles as well. The thickness of the curve is 2mm.

Happy printing!