DN50 to 24mm coupling

DN50 coupling to accomodate 24mm hose. Pleas keep in mind that you have to use temperature resistant filament if you plan on running hot water through this coupling. It will only ever receive cold water in my case whis is why i used PETG.

Outer Diameter: DN50 (50mm)
Inner Diameter: 24mm

Recommended Print Settings:

• print upright (file is oriented correctly)
• no supports needed
• 0.15mm or 0.2mm Layer Height
• 4+ Perimeters
• PETG

If you need anything, feel free to reach out! Questions/Suggestions/Criticism is highly appreciated. Happy Printing…

[Desciption may include amazon reflinks]