Massage Roller Stick

This is a massage stick. Great tool to work out the lactic acid from your legs after a workout. You need to purchase the 7/8ths inch diameter PVC pipe and super glue extra. (please refer to photos for exact PVC pipe I bought.)

The massage stick in the picture has 2 handles and 14 rollers. You can make yours as long or short as you want depending on how many rollers you print. 

Supports; NONE

infill: %15

STEPS:

1. Print handles and rollers (more rollers for longer length, less rollers for shorter length.)
2. BEFORE YOU CUT THE PVC PIPE, you want size the rollers and handles on the PVC pipe. I cut the PVC pipe a little long and then trimmed it down to the correct size before gluing inplace. With both handles in place, you should be about to slide the rollers apart from each other about 2 mm.  this gap ensures the rollers roll smoothly. 
3. Once the PVC pipe is at your desired length, then glue the handles in place.  be sure not to get the glue on the rollers. I used superglue and it has worked fine. The stick in the picture is a couple years old. It hasn't com apart yet.