model transalp with mag alloy wheels remod

Hello again

Alrighty....

final update....

I figured that the mag wheels were aweful all in black, so now you have wheels with separated tyres. Now you can have silver wheels with black tyres....

So fed up with trying to get spoked wheels to come out even half decent that I decided you guys might save a lot of stress with mag wheels (I know they are not original)

All the new files have the prefix new remod.....

Now you can change the colour of the wheels and with a sigh of relief achieve wheels that are not falling to bits....

sorry it took so long to address this .....

the last pictures are of the remod with exploded views of the modifications....

here is a honda transalp 750 model…

 I used 100% infill because I was scared the handlebars and brake levers would break off…. again it is a real nightmare removing the supports, so I used 15 degrees overhang thresh hold……

a bit bleak in white…. it would look better with a colour 3d printer…….. bit of a dummy,I forgot there was no stand,so I included one. the back wheel is a bit of a tight fit….

alrighty....

so sick of having the mirrors dissolve while printing that I have made some stronger ones and also a separate set of handlebars....

this should help some....

Yay! Perfectly printed handle bars with intact mirrors....

note : be careful removing organic supports, where the holes for the handle bars go, they resemble the other supports in there and it is easy to mistake them for supports. then you will need some glue.

(Black handlebars dont look good on a white bike but you get the idea)