Lightend hotend cover with diamond pattern

You need 6 times 8x2mm magnets and 2 times 6x3 magnets but no extra bolts are needed for this model

I have adjusted the model so you can use the original screws from the blowerfan using a special profile so they can tap themself. 

I have positioned the screw holes next to the fan not inside the fan holes because that is too weak.

I have also integrated a custom support, you need a pair of pliers or snips to break the weak parts to release the support.

Mounting the blower fan inside might be hard because every part is tight against the fan. Be careful because the wall might break.