Death Star Clock - REMIX

Mix and match of different parts from the following links to create a new clock combo. Up to four colours for each plate

• Print larger pieces at 0.20mm or 0.22mm layer height
• Smaller pieces at 0.14mm to 0.16mm
• Printed using hardened steel 0.4mm nozzle on Kobra S1 combo
• Organic tree supports with a Z-top distance 0.275mm just come off like butter
• Slow first 2 or 3 layers for dainty pieces to 30mms for good adherence
• Ironing - rectiliner 10%

The second hand will need to be trimmed to your liking with side cutters.

All 3 hands needs a bit of work in the centre holes. This was intentional as I didnt want them fitting too loose