Filament (Food) Dryer Extension Rings for Silvercrest

Single part ring to extend a Silvercrest Food Dryer to fit Filament Rolls inside.
Could work with other Food Dryers as well. 

It is printable on large printers only, like the Prusa XL.

I created several sizes so you can print the size best for your Filament. 
You can also stack multiple on top of each other. For example, combine M and S to create a XL (14cm).

Sizes:

• XS 4CM
• S 6CM
• M 8CM > Prusament 1KG Spools
• L 10CM
• XL 14CM > Prusament 2KG Spools (or combine some)

Printing:

• Can only be printed on large printers (Prusa XL)
• The ring will be printed upside down. 
• Using a 5mm brim on both (in- and out) sides.  (the blue example is printed without brim - worked with XL Enclosure)
• Used the PEI Sheet with glue stick! (could ruin your sheet if you skip this)
• I printed them in ABS. 
  Depending the materials you want to dry (temperature and duration matter), you could also print in PETG, ASA or even PLA. 

Check the Prusa Knowledge Base - Drying Filament for temperatures and duration

The Food Dehyrdrator I have is bought in juli of 2025 at Lidl.
Silvercrest SDA370B1 IAN 482201