Packout Accessories

My version of a modular Milwaukee Packout accessory mounting system. Currently consisting of a side mounted Alu flat bar 50X3mm (dimension drawing included) to hang tools off or attach bins to and a pipe holder for putting cable spools on for easy run out. The pipe diameter is limited to 50mm max. A 75mm dia Cup holder as well. 

The Packout bar clamp uses 4 X M5X8 brass inserts and 4 X M5X20 countersunk cap screws to fix the two parts together around the Packout bar. Fitment is tight so may need a bit of adjustment. The front part gets a M6X8 Brass insert, make sure it does not protrude out the other side.

The Packout flat bar end uses 2 X M5X6 brass inserts (make sure they don't protrude either side. 2 X M5X8 countersunk cap screws clamp the bar in place.

The pipe holder fixing uses a M5X8 brass insert with a Butterfly screw of the length needed to secure the pipe in position.

If you have your own idea for an attachment and need the dimensions of the dovetail drawing just drop me a message.