This was modeled after the microphones used by the band in Kpop Demon Hunters on Netflix. It is meant for use as a costume prop. It is split into pieces for easy painting printing (or multiple filament colors) and assembly.
Recommendations:
Use a high resolution on the mic grille. I printed mine with a 0.4 mm nozzle at 0.08 mm layer height. I didn't test with other settings, but if you go with a larger layer height you may loose a lot of detail.
Print orientation: Lower Grille - upside down, Collar - upside down, Top Black - upside down, all others are right side up or it doesn't matter.
Supports: Use supports for the Lower Black and Middle Silver piece. You might be able to get away without supports on the silver piece, but depending on your bridging there maybe too much droop for the pieces to fit together completely, and sanding will be required.
Do not use supports in the peg holes. They are 6 mm in diameter and you will plug them.
AbnormAnomaly
