T12 / T15 soldering iron tip holder

Here's a completely over-engineered T12/T15 soldering iron tip holder. It can be wall mounted to hold tips in either a vertical or horizontal orientation. The round, enclosed portion of the holder flexes outward to make inserting and removing the tips easier. I modularized the design by creating three different versions that can be fitted together making it infinitely expandable.

• The "Top" model has male and female dovetails with screw holes at each end.
• The "Middle" model is the same as "Top" but has only one screw hole in the middle (if needed).
• The "Bottom" model has only female dovetails and with screw holes at each end.

Do you have a KSGER soldering station? Take a look at my KSGER mounting bracket. It allows you to keep up to four of your favorite tips on top of your soldering station.

Print Settings

Rafts:

No

Supports: 

No

Resolution:

0.16

Infill: 

20%

Notes:

I suggest using 2 perimeters/walls, 3 bottom layers, 4 top layers. These work just fine when printed in PLA as well.

Category: Tool Holders & Boxes