Beta Motorcycle Front Brake Line Relocation

If you have a GPS or tablet mounted at the bars, the brake lines can get in the way/snag on them.  This relocates the line compliance down to the forks.

This is a ground up creation of a similar product available for KTMs from Taco Moto.  

You need to remove the rigid cover over the brake line.  See the tool which uses a standard razor blade to make the slit.  You may need to use a small C clamp to secure the blade.   Be careful not to nick the line.

Theres a top and bottom part, labelled.  The top one prevents the line from moving further up.  See the Taco Moto video of general install procedure.

Print using 95A TPU with 4 perimeters, 4 top and bottom layers and 40% infill.

Fusion 360 files included.