Drill bit storage rack Ø1–Ø 13 mm

hello,

Wall-mounted drill bit holder Ø1–Ø13 mm
Printed in PLA with 0.20 mm layer height, 0.40 mm nozzle, and automatic supports.
See photo for recommended print orientation, which also allows color changes to make the numbers easier to read.
If necessary, holes can be slightly reamed with a drill bit to adjust the fit — although in my case, no adjustment was needed.

(In the photo, my drill bits are reclaimed ones, a bit worn and not all the same length.
I store them upside down, but you can just as well store them upright.)

for the set :

 . 1 drill bit holder, 

 . 2 wall mounts, 

 . 2 screws FHC (Ø5 mm max).

Can be assembled with the drill-bit support using the linking piece between the drill-bit and tapping supports.

https://www.printables.com/model/1478845-wall-mounted-storage-for-taps-m3-m12-and-matching

Good print.