Garden Chair Cap

The original end caps on my garden chairs (unknown model) had become brittle and broken over time. Since replacement parts were nowhere to be found, I decided to design a perfectly fitting cap myself!

Print Settings:

•    Infill: 20 percent to 40 percent (for extra durability)
•    Layer Height: 0.2 mm
•    Supports: Not required (the model is designed to be printed without supports).

Material Recommendation: 
For outdoor use, PETG or ASA/ABS (due to their UV resistance) is highly recommended. PLA is less suitable as it can soften and deform in direct sunlight.