Revopoint Trackit Crossline-Laser for easier Setup

Have a look at my other design for the Trackit!

Fancier WIP version: https://www.printables.com/model/1428220-wip-revopoint-trackit-fancy-fov-projecting-laserhttps://www.printables.com/model/1428220-wip-revopoint-trackit-fancy-fov-projecting-laser

This design is based on the Cigman CM-G02 crossline-laser. The step-files can be remixed for other lasers.

Function

The laser indicates roughly the tracking FOV of the Trackit and therefore makes it easier to setup the tracker  for multiple scans. I initially designed a unit consisting of multiple single-line lasers but the lasers weren't strong enough. 
With a snapped on aperture the lasers are limited to the FOV of the tracker to allow immediate feedback of positioning. Mounting to the tracker is realised with a mounting-plate which secures to the laser with a 1/4 camera-screw and slides on the Swiss-Plate of the tracker.

Mount and aperture are independent prints and are both friction-fit. Therefore you may need to adapt the step-files for best fit with your printer, especially for the Swiss-Plate mount. 
The aperture is designed to limit the laser-lines to 3200mm*2800mm at 4m distance (as per tracker spec).

Printing

For the aperture it may be beneficial to use a 0,2mm nozzle to get a more detailed print.

BOM

• Cigman CM-G03 crossline-laser
• 1/4in Camera-screw