Leg cap to prevent sinking into soft ground.

Outdoor Chair Leg Sleeve – Anti-Sink Foot Guard
Prevents your garden chair from sinking into soft ground.
Two version:
-Thickness of the chair leg approximately 23 mm;
-Thickness of the chair leg approximately 24.5 mm;

3D printing settings

Print 0.2 to 0.3 layer
Supports placed on the table surface;
Infil: 10%-15%;
Print with brim(optional)
Preferred material: ABS/PETG
For better durability, set the print to 4 or 5 walls.