Wing Lifter, Overrun Stand, Corner Bearing Protection, Transport Protection, Window PVC

This a Wing Lifter, Overrun Stand, Corner Bearing Protector or Transport Protection for PVC Windows

Printing recommendation:

Filament PETG, 0.4 Nozzle, 0.2mm Structural, 100% Infill, no supports

Mounting instructions: (see picture below)

Just click it into the bottom rail of the window frame with the low side to the window sash. As far away from the corner bearing as possible, to support the corner bearing when the window is closed. For a large Window sashes you can use more than one wing lifter.