Can dispenser bottom 0,5l top 0,33l elongated cans (long cans)

This is my own can dispenser. If you need different diemensions or anything is wrong you can message me :)

General information:

• Max. height: ca. 390mm
• Max. lenght of the dispenser: 412mm
• Dovetail joint tolerance: 0,19mm
• Hexagon joint tolerance: 0,14mm
• Filament needed: ca. 2700g 
• Print time: ca. 3d13h or 85h for me (depends on settings)

Top dispenser: 

• Can diameter: ca. 60mm
• Can lenght: max. 148mm (than you have 1mm on each side buffer)
• Amount of cans it can hold: 11 cans

Bottom dispenser: 

• Can diameter: ca. 68mm
• Can lenght: max. 168mm (than you have 1mm on each side buffer)
• Amount of cans it can hold: 10 cans

!!! no support !!!