Family-OralB-Holder with charging bay

Family OralB Holder with charging bay

Hi all, as a family everyone of us has it's one OralB so four brushes stood loosely in our bathroom and normaly if you incidentally kick one of them, all will fall. But no one wanted to just lay them flat either. 

So I decided to design a holder with comes with a swivelling charger arm. Currently we have 3 generations of OralB toothbrushes, but the charger always remain the same and works for all of them.

I made the holder with Prusament PLA, but I guess PETG will also work. To use the swivelling charger arm you need a M5x25mm bolt and nut. There is even some space behind the brushholder, but frankly we don't use it.

What I did also consider is a little sliding bay for a 120x120 ceramic plate. Of course you can use the holder without one, but it just looks nicer and is easier to clean. 

Printing time is fairly long, as the holder is a complex model and you need support turned on.

Funny thing is with new version of PrusaSlicer 2.4.0+arm64 the model shows now autorepair on 43 errors on my system now (but still printable), before that version all was clean and as you see in my photos it came out well.

Hope you'll have fun and use of this model!