March 1, 2022
Description
The XF-11 experimental reconnaissance aircraft has to be one of my favourite looking aircraft of all time. Designed by Howard Hughes in the 1940's, it was fitted with 2 sets of contra-rotating props and controllable-pitch propellers. On its maiden flight in 1946, piloted by Hughes himself, it resulted in a near fatal crash totalling the craft. A second was later built with a single 4-bladed prop on each boom, but was ultimately never adopted.
Included is the full kit card along with the individual parts files and a frameless version for those uninterested in the format.
If it's still a little wobbly, try increasing the Z axis (uppy-downy) by 10-20%!
Bribes accepted for any edits... ;)
**If printing the individual parts, be sure to print:
4x XF-11_Prop
2x XF-11_Boom
2x XF-11_Connector
2x XF-11_Wing_Outer**
Always love seeing your makes! Thank you :)
Interested in selling? All files are marked as non-commercial along with any remixes created from them.
If youare interested in selling physical prints of my models anywhere, be it online or offline, you can obtain asales license when subscribed to Tier 4 of myKo-Fi memberships!
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
100%
Filament: Geeetech PLA White
Notes:
It's a nice snap fit for me and my printer, results may vary! To tweak the tightness, simply increase or decrease the Z height in your slicer, otherwise a little glue can go a long way!
No tools required, however I would recommend some wire snippers and a small blade for clean-up :)License:
Creative Commons — Attribution — Noncommercial
Nakozen
