Flashforge AD5x Left panel clamp

The AD5x main panel on the left side has the potential to rattle against the frame.  The right panel is clamped tight with the IFS so I made a small part to clamp for the left panel as well. 

 It uses M3x5x4 heatset threads  (4mm long, 5mm diameter, Voron standard)  and a couple of m3x5mm or m3x8mm flat head flush screws.   Put the screws into the two holes in the inside of the left frame which are intended for left side IFS and thread into the clamp on the outside of the panel. 

 I face the heated inserts out so you are pulling them into the part tighter.